Mark-10 ESM301, Руководство пользователя

Страница: 6 / 40

Model ESM301 Programmable Force Test Stand
1. Fuse
2. Controller Cable Connector
Plug one end of the cable into this connector, and the other end
into the connector as shown in the illustration on the following
page. If this cable is not connected, the error message
ENCODER ERROR
will be shown on the display and the test
stand cannot be operated.
3. PC Control Connector
Plug one end of the 09-1056 serial cable into this connector, and
the other end into a serial connector on a computer.
4. Power Plug Receptacle
Plug the power cord in here.
5. Travel Indication Connector
Plug one end of the USB/RJ11 cable into this connector, and the
other end into the mini USB connector in the rear of the cross-
head.
6. Force Gauge Cable Connector
Plug one end of the 09-1143 cable into this connector, and the
other end into a Series BG force gauge.
2
1
4 3
5
5
6