Mark-10 ESM301, Руководство пользователя

Страница: 5 / 40

User’s Guide
In general, the ESM301 can be mounted at any angle, although
extra care should be taken during installation and operation.
Once the test stand is in a stable and secure position, install a force
gauge with four thumb screws (provided). All Mark-10 gauges
(except the Series CG) mount directly without adapters. Grips can
be mounted onto the force gauge and test stand base.
3.4 Setting Up The Controller
The power plug and controller cable must be connected to the rear
of the controller, as shown in the illustration below:
4