Services
Page
50
of
110
ATTENTION
Failure to react upon the service interval requirement can affect the accuracy, performance,
and functionality of the sensor which will compromise the requirement(s) of the regulatory
agencies.
7.1.3
Turbidity
For the Turbidity Module a factory calibration is not required, however upon request, our
service engineers can perform a full factory calibration in our factory or onboard the vessel.
A new calibration certificate will be issued. For further inquiry – please refer to contact
information in section 1.2.
7.1.4
PH/Temperature
For the PH/Temperature Module a factory calibration is not required, however upon
request, our service engineers can perform a full factory calibration in our factory or
onboard the vessel. A new calibration certificate will be issued. For further inquiry – please
refer to contact information in section 1.2.
