45
44
EN
EN
The Orlando swimming pools are equipped with plastic self-closing frame. In case of
dismantling and changing the foil, it is necessary to keep free access to the frame
from above. From the outside, 6 cm wide and 6 cm deep.
The Orlando swimming pools are equipped with metal frame. The top rails of the
frame are with the bottom part of the frame connected by buttresses and co-
nnectors. On the outside of the connectors there is a screw that secures the co-
nnection between the connector and the buttress. The top frame can be removed
after disassembly of these connectors. In case of dismantling and changing the foil,
it is necessary to keep free access to the frame from above and from the outside (at
least 6 cm in width and 6 cm in depth). If a paving is used, it is necessary to leave the
paving adjacent to the entire top frame removable.
When adjusting the surrounding area of the pool, make sure that there is sufficient
space to remove and install the top frame, including its screw connections.
C. IN CONCLUSION
The use and maintenance of the swimming pool and accessories is described in the opera-
ting instructions supplied with the pool. You must read the instructions before use.
DRAWINGS OF THE BUILDING SITES
DIMENSIONAL DRAWING OF THE CIRCULAR SWIMMING POOL SITE
DIMENSIONAL DRAWING OF THE ORLANDO OVAL SWIMMING POOL SITE
Key to the figures:
A wall and foil
B top frame
C studded membrane (outside the pool wall)
D paving
sub-base under the paving
concrete fill
unmade ground
Diameter of the pool ORLANDO type
3,6 m
4,6 m
5,5 m
R radius of the pool
180 cm
230 cm
275 cm
S radius of the site
195 cm
245 cm
290 cm
Dimension
R 183 cm
S 200 cm
L 91,5 cm
M 45 cm
P 90 cm
T 274 cm
W 300 cm
X 183 cm
Y 205 cm
Z 304 cm
A-B-C
posts with a flat top end
D-E-F-G-H-I-J-K
survey stakes
