Marco MIX PB3, Руководство по обслуживанию

Страница: 22 / 69

1000870,871,875,878,879,880,887 MIX Service Manual.b
Page 22 of 69
7.2 Advanced Settings (Hold all 3 buttons simultaneously for >3 <6 seconds)
Screen 1 Screen 2
Setting Options
Descale Weeks OFF, 1-60 weeks – When set to a week period, a message will appear on
screen to descale after that time period has elapsed.
Filter Litres OFF, 500 – 15000L – When set to a Litre amount, a message will appear
on screen to replace the filter after that amount of water has been used.
Set Pin Setting the PIN to any number other than ‘0000’ will restrict access to
the Advanced and Engineering Level settings.
Blank, any 4-digit combination.
(Back door PIN in the event of forgotten PIN is: 1793)
Factory Preset Resets a number of Engineering Level settings specific to a machine type.
Allows selection of machine type from:
TAP
PB3
PB8
UC (3 button)
UC (1 button)
Mode Allows selection of mode types from:
Mode Type T be used for:
UC COLD HOT
UC version connected to 3 button font UC HOT COLD
UC MIX BOTH
UC SINGLE UC version connected to a single button font
COLD HOT
PB version in Multi-temp operation HOT COLD
MIX BOTH
SINGLE PB version in single-temp operation
TAP Tap versions
COLD 60S for calibration and diagnostic purposes only
HOT 5S for calibration and diagnostic purposes only
Temp Units
o
C or
o
F