Marco Polo ETP-LOC-01, Руководство по эксплуатации

Страница: 8 / 28

4
Charging the Tag - press and hold the power button on the tag until the red light
begins to flash. The tag’s status light will flash until the charge cycle is complete
and then the light will go off. The tag will not function while charging is in
progress. Make certain to securely replace the protective rubber cover after
charging, if necessary, twist the cover back and forth while pressing to seat the
cover all the way into the hole.
Charging the Locator - the locator’s battery status indicator will show the charge
level increasing during the charge cycle and then the indicator will show full
when the charging is complete. The locator can be used in any mode while
connected to the charger.
Tag Attachment
To attach the tag to your pet’s collar, place the hooked end of the collar clip
against the top edge of the collar and press down firmly until the collar is all the
way inside the clip as shown in Figure 4.
Charging Jacks
Figure 3
Location of Charging
Jacks