Marco Polo ETP-LOC-01, Руководство по эксплуатации

Страница: 18 / 28

14
Monitoring a Pet
One of the most unique and powerful features of your Marco Polo system is the
ability to monitor your pets 24 hours a day to ensure that they have not left your
yard or other designated area. To get the most out of the monitoring features of
the system you will need to customize the settings for your individual situation.
After this is done you will not need to adjust the settings unless you change
locations or wish to alter the way Marco Polo notifies you about a missing pet.
Monitoring Setups
The Marco Polo system allows you to select individual boundaries for up to three
different pets as well as select the type of notification you will receive when the
pet wanders outside of that boundary area.
To enter the Setup mode turn the
locator on and then press and hold the Select button until Setup begins flashing
on the display as shown in Figure 10. Press select again to enter setup mode.
The 3 mode boxes will now flash prompting you to press the Pet button you wish
to set up. Press Pet button 1, 2 or 3 to continue. The display will now flash the
last stored setting (or factory default) for the alarm mode as shown in Figure 11.
Flashing
Figure 10
Starting Setup Mode
At all times when using the system while in a
vehicle, follow safe driving procedures, use hands-
free operation and whenever possible have a
companion with you to operate the locator.