Marco Polo ETP-LOC-01, Руководство по эксплуатации

Страница: 24 / 28

20
Switching Between Modes
You can transition a pet’s tag directly from one mode to another by pressing its
pet button until the mode you want (Track, Monitor or Idle) is indicated and then
press select. You may cycle through the available modes as many times as you
want as long as you press the pet button at least once every 5 seconds and don’t
press Select. Note that only one pet may be tracked at one time so if you move a
pet’s tag from idle to track or from monitor to track any other active tags will
disappear from the display so that you can concentrate on tracking the selected
pet.
Low Battery Alarm
Each time the locator communicates with a tag, the tag sends back its battery’s
charge status to the locator. If the tag’s battery is low then the Low Battery
message will appear on the display and there will be one short beep each time the
locator communicates with the tag. At the time that the low battery alarm is
displayed the tag still has enough battery capacity to stay in monitor mode or idle
mode for about one more week or track mode for about 8 hours. If you are not
using the locator to monitor your pet(s) then you should check the battery status
of each tag once a week by turning the tag off and back on and observing the
number of times the status light flashes when the tag starts up. 1 flash means a
low battery condition, 2 flashes is half charged and 3 flashes indicates a fully
charged battery. You can also check to make certain the tag’s battery is not low
by putting it into track mode from the locator and checking to see if the Low
Battery icon is shown on the locator’s display.
Figure 17
Monitoring 3 Pets
Pets 1 and 2 in Alarm