March Networks GW-DS150N, Руководство пользователя

Страница: 39 / 65

41
Set ‘Config Mode’ to ‘Enrollee’
，
and then push the ‘WPS’ button on your wireless access point (the
button used to activate WPS standby mode may have another name), or use other way to start WPS PBC
standby mode as the instruction given by your wireless access point’s user manual.
You can also set 'Config Mode’ to ‘Registrar’. In this mode, this wireless network card will wait for other
WPS-enabled access points to send WPS pairing requests. Please refer to the instruction given by your
wireless access point’s user manual to understand how to send WPS requests.
Before you start to establish the wireless connection by using WPS, you can click ‘Rescan’ button to
search for WPS-enabled access points near you again, to make sure the WPS function of your access
point is activated.
All access points with WPS function enabled will be displayed here. Please make sure the access point
you wish to connect is displayed. If not, please click ‘Rescan’ few more times. You can also click