March Networks GW-DS150N, Руководство пользователя

Страница: 23 / 65

25
Here are descriptions of every setup item:
To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:
REvice you wish to connect. When you’re adding a profile from an existing
access point or wireless device, the encryption type will be selected
automatically, and please do not modify it.
WPA
Preshared Key
Input WPA preshared key here. If encryption is not enabled, or you select
‘WEP
，
as encryption type, this field will be disabled and grayed out.
WEP Key
You can select key type (Hexadecimal or ASCII) and input WEP key here. If
encryption is not enabled, or you select ‘WPA' as encryption type, this field
will be disabled and grayed out. You can set up to 4 WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII. For Hexadecimal
key, you can input number 0-9 and alphabet a-f; for example,
‘001122aabbcc
’；
For ASCII key, you can input number 0-9 and alphabet
a-z; for example, mywepkey12345.
The length of WEP key depends on the type of WEP key you selected. You
can input 10 or 26 hexadecimal characters and 5 or 13 ASCII characters as
WEP key.
Show
Password
Check this box and all passphrases or security keys you inputted will be
displayed as you type, but not replace your input with asterisk.
Use 802.1x
If the access point you wish to connect requires 802.1x authentication,
please click on ‘Use 802.1x’ box, then click ‘802.1X’ tab to set 802.1x
parameters.
SystemConfig Auth. VEncry. 8021X
EAP Method» PEAP ▼ Tunnel Authonticattoo» EAP-MSCHAP v2 ▼ g Session Resumption
ID \ PASSWORD Client Certification Server Certification