Marathon Power vault series, Руководство пользователя

Страница: 5 / 36

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
1. This Manual Contains Important Instructions that should be followed during Installation and
Maintenance of the UPS and Batteries.
2. CAUTION (UPS with Internal Batteries) : Risk of electric shock - Hazardous live parts inside
this unit are energized from the battery supply even when the input AC power is disconnected.
3. CAUTION (No User Serviceable Parts) : Risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
4. CAUTION (Non-isolated Battery Supply) : Risk of electric shock, battery circuit is not isolated
from AC input / output; hazardous voltage may exist between battery terminals and ground.
Test before touching.
5. WARNING (Fuses) : To reduce the risk of fire, replace only with the same type and rating of
fuse.
6. WARNING: Intended for installation in a controlled environment. The maximum ambient
temperature is 40°C.
7.
CAUTION : Do not open or damage the battery, electrolyte may be released which is harmful
to the skin and eyes.
8.
CAUTION : A battery can present a risk of electric shock and high short circuit current. The
following precautions should be taken when working with batteries:
a.
Remove watches, rings and other jewelry or metal objects.
b.
Use only tools with insulated handles.
c.
Wear rubber gloves and boots.
d.
Do not lay tools or metal parts on top of batteries.
e.
Disconnect charging source prior to connecting or disconnecting battery terminals.
9.
Do not dispose of batteries in a fire, as they may explode.
10.
To reduce the risk of electric shock, disconnect the UPS from the AC input power supply
before installing a communication interface cable. Reconnect the power cord only after
communication interconnections have been made.
11.
Battery replacement should be performed or supervised by personnel with knowledge of
batteries. Keep unauthorized personnel away from the batteries.
12.
CAUTION : To reduce risk of fire, connect only to a circuit provided with 2pole 70A maximum
branch circuit over current protection in accordance with the National Electric Code,
ANSI/NFPA 70". An AC output disconnect shall be provided by others.
5