2-6
DECK MECHANISM ADJUSTMENT
1. Tools and Fixtures for SVC
¥ For SVC Program Down-Load
¥ For T-Skew and R-Skew Adjustment
2. Install Process
1. Connect Fig. 1, 2, 3 as Fig. 7.
2. Plug out the Power cord of DVD set.
3. Connect FFC Cable(Fig.2) to the Connector on DVD Set(Fig.8)
4. Connect Printer Cable(Fig.1) to the P.C.Printer Port (LPT1).
5. Plug in the DVD Power cord.
6. Press the Menu key on Remocon.
7. Confirm No.1 LED(RED Color) of Jig board is ON. (Fig.9)
8. Perform The S/W for Down-load at P.C.
9. Open the Program File for Adjusting(Fig.10)
10. Click the Down-load Icon and perform Program Down-load.
11. Displayed remaining time.
12. Confirm LED No.1(RED) and No.2(RED) is ON.
13. Plug out the DVD Set Power cord.
14. Disconnect the FFC Cable.
Not spare parts
Fig.1. Printer Cable
Fig.2. FFC Cable (15 pin)
Fig.3. Jig Board
PART NO.*DV3100JIG
Included in <Jig board>
Fig.4. Deviation Disc (0.8mm)
Not spare parts
Fig.5. L-Wrench(3mm)
Not spare parts
Fig.6. RCA Jack
Fig.7. Connecting Method
LED1 LED2 LED3
Rom Size
File Help
16MBit
6M Bit
LPT1
Manual
953826Bytes
md
_bas_ntsc.bin
LPT2
Port
FILE NAME
OPEN
DOWN LOAD
CLOSE
Fig.9. Jig Board LED Condition
Fig.10. Adjusting Program File Open
REAR PANEL
Fig.8. FFC Cable Connecting
All manuals and user guides at all-guides.com
all-guides.com
