8
R E A R
1
2 3
4 5
8
Dust protection cap
6
7
1
1. POWER CORD
1
2. VIDEO OUT JACK
1
3. COMPONENT VIDEO OUT/PROGRESSIVE
SCAN JACKS
1
4. S-VIDEO OUT JACK
1
5. VIDEO OUTPUT SELECT SWITCH
1
6. COAXIAL DIGITAL AUDIO OUT JACK
1
7. AUDIO OUT (L/R) 1, 2 JACKS
1
8. OPTICAL DIGITAL AUDIO OUT JACK
REMOVE THE DUST PROTECTION CAP FROM THE CON-
NECTOR AND CONNECT THE OPTICAL DIGITAL CABLE
(NOT SUPPLIED) FIRMLY SO THAT THE CONFIGURA-
TIONS OF BOTH THE CABLE AND THE CONNECTOR
MATCH. KEEP THE DUST PROTECTION CAP AND
ALWAYS REATTACH THE CAP WHEN NOT USING THE
CONNECTOR TO PROTECT AGAINST DUST INTRUSION.
This DVD player support two remote control codes: C1 and C2.
When the unit is shipped from the factory, the remote code is set to C1.
To change the remote control codes press and hold and hold CLEAR button for at least five seconds.
Changed remote control codes is displayed in the display window.
Set the remote control codes of the remote control to the same setting.
Notes
This setting can not be used if a disc is playing.
If a DVD has been loaded, be sure to press STOP twice before proceeding.
All manuals and user guides at all-guides.com
