background image

3

Who is covered?

You must have proof of purchase to receive warranty
service.

What is covered?

1. Warranty coverage begins the day you purchase your

Plasma Television, and continues for a period of one year.

2. Marantz America will provide in-home warranty repair.
3. Marantz America will incur all labor charges for repairs

during the warranty period.

4. Marantz America will incur all freight charges for

warranty repairs, both to Marantz and the return to the
customer.
We suggest keeping all packing materials for any shipping
that might be required.

5. All parts, including repaired and replaced parts are

covered only for the original warranty period.

When the warranty on the product expires, the war-
ranty on all replaced and repaired parts also expires.

What is excluded?

Your warranty does not cover:

1. Labor charges for installation or setup of the product,

cleaning, adjustment of customer controls on the product,
and installation or repair of antenna systems outside of
the product.

2. Improper installation, removal or maintenance, or failure

to follow instructions supplied with the product.

3. Reception problems caused by signal conditions from

cable or antenna systems outside the product.

4. Repair, attempted repair or modification performed by

anyone other than an authorized Marantz America service
center.

5. Any product, on which the serial number has been

defaced, modified or removed.

6. Warranty is void if purchase was made from anyone other

than an authorized Marantz dealer.

7. Warranty is void if purchased from outside The United

States of America.

8. Warranty only valid in the United States of America.
9. Damage due to lightning or power line surges, spikes and

brown outs, damages that occur during shipping or transit,
or damage which is attributed to acts of God.

10. Incidental or consequential damages resulting from the

product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above ex-
clusion may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights
that vary from state to state.)

11. Commercial or institutional use.
12. Any other cause which does not relate to product defect.
13. Burns or residual images upon the phosphor of the tubes.

NOTE: Pixel defect
Plasma is one of the most advanced technologies for
consumer products. The panel is made by high precision
technology, however some pixel defects may be found on
the Plasma display panel. We are trying our best to control
the quality in order to reduce the number of defective
pixels. It is almost impossible to have zero pixel defects,
even using the most advanced technology. This is not a
problem only for Marantz, but all Plasma manufacturers.
Therefore we have to note that the warranty does not cover
the Plasma display panel for pixel defects. We appreciate
your understanding.

Before requesting service:

Please check your User Guide before requesting serv-
ice. Adjustments of the controls and hook up guide-
lines discussed there may save you a service call.

To get warranty service:

Repair must be performed by an authorized service
center. If you do not know of a Marantz authorized
Plasma Television service center, contact your dealer.
If your dealer is an authorized service center, they
will arrange for repair.
If your dealer is not a Marantz authorized Plasma
Television service center, they will direct you to an
authorized service center.

Optimum performance:

For optimum performance and picture quality, the
Plasma monitor is only guaranteed up to 6,230 feet
above see level.

Limited Warranty for the Marantz SLIM SERIES PLASMA MONITOR

01̲Plasma̲01̲09

04.9.2, 11:42 AM

3

Содержание PD5050D






































Отзывы: