69
Source Rename
Change the display name of the selected input source.
This is convenient when the input source name of your device and the input source name of this unit are
different. You can change the name to suit your needs. When the renaming is completed, the name is
displayed on this unit’s display and on the menu screen.
Setting details
CBL/SAT
/
DVD
/
Blu-ray
/
GAME
/
MEDIA PLAYER / TV AUDIO / AUX / CD / M-XPort
: Change the
display name of the selected input source.
•
Up to 12 characters can be input.
•
For character input, see
page 57
.
Set Defaults
: The input source name is returned to the default setting.
•
Yes
: Reset to the defaults.
•
No
: Do not reset to the defaults.
If you select “Set Defaults” and press
ENTER
, the message “Reset to the
default values?” is displayed. Select “Yes” or “No”, and then press
ENTER
.
Hide Source
Default settings are underlined.
Remove from the display input sources that are not used.
Setting details
CBL/SAT
/
DVD
/
Blu-ray
/
GAME
/
MEDIA PLAYER / TV AUDIO / AUX / CD / TUNER / M-XPort
:
Select input source that is not used.
•
Show
: Use this source.
•
Hide
: Do not use this source.
NOTE
Input sources set to “Hide” cannot be selected using the input source select button.
Inputs
Source Level
Default settings are underlined.
•
This function corrects the playback level of the selected input source’s audio input.
•
Make this setting if there are differences in the input volume levels between the different sources.
Setting details
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which “DIGITAL” is assigned at “Digital Assign” (
v
page 68
).
Input Select
Default settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items
Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto
: Automatically detect input signal and perform playback.
HDMI
: Play only signals from HDMI input.
Digital
: Play only signals from digital input.
Analog
: Play only signals from analog input.
•
“Digital” can be set for input sources for which “DIGITAL” is assigned
at “Digital Assign” (
v
page 68
).
•
If the input source is set to “CBL/SAT”, “Blu-ray” or “CD”, it can be set
to “Analog”.
•
When digital signals are properly input, the
indicator lights on
the display. If the
indicator does not light, check “Digital Assign”
(
v
page 68
) and the connections.
•
If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is “TV” is fixed to ARC.
