72
Manual Setup
Default settings are underlined.
Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
•
If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select
Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (
v
page 61
).
•
“Manual Setup” can be used without changing the settings. Please set if necessary.
Setting items
Setting details
Speaker Config.
Indicate speaker presence
and select speaker size
categories based on bass
reproduction capability.
NOTE
Do not use the outward
shape of the speaker to
determine selection of a
“Large” or “Small” speaker.
Instead, use the frequencies
set in “Crossovers”
(
v
page 74
) as the
standard for determining
bass reproduction capability.
Front
: Set the front speaker size.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
When “Subwoofer” is set to “No”, “Front” is automatically set to
“Large”.
•
When “Front” is set to “Small”, “Center” and “Surround“ can not be
set to “Large”.
Center
: Set the presence and size of the center speaker.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
Subwoofer
: Set the presence of a subwoofer.
•
Yes
: Use a subwoofer.
•
No
: Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer” is automatically set to
“Yes”.
Surround
: Set the presence and size of the surround speakers.
•
Large
: Use a large speaker that can adequately play back low
frequencies.
•
Small
: Use a small speaker that has inadequate playback capacity for
low frequencies.
•
None
: Select when the surround speakers are not connected.
Setting items
Setting details
Bass
Set subwoofer and LFE
signal range playback.
Subwoofer Mode
: Select low range signals to be reproduced by
subwoofer.
•
LFE
: The low range signal of the channel set to “Small” speaker size is
added to the LFE signal output from the subwoofer.
•
LFE+Main
: The low range signal of all channels is added to the LFE
signal output from the subwoofer.
•
“Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer”
(
v
page 72
) is set to “Yes”.
•
Play music or a movie source and select the mode offering the strongest
bass.
•
Select “LFE+Main” if you want the bass signals to always be produced
from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.” are set to “Large”, and
“Subwoofer Mode” is set to “LFE”, no sound may be output from the
subwoofers, depending on the input signal or selected sound mode.
LPF for LFE
: Set LFE signal playback range. Set this when you want to
change the playback frequency of the subwoofer.
•
80Hz
/
90Hz
/
100Hz
/
110Hz
/
120Hz
/
150Hz
/
200Hz
/
250Hz
Speakers
