UPDATING
PROCEDURE AFTER REPLACING THE PCB.
PROCEDURE AFTER REPLACING THE U-COM, ETC.
2. Update preparation with a USB flash drive (U3001, U3013, NETWORK MODULE)
4. Update Method for Service Region Settings (U3001, U3013, NETWORK MODULE)
5. Normal Firmware Update Method from USB Flash Drive (U3001, U3013, NETWORK MODULE)
6. Normal Firmware Update Method from OTA (U3001, U3013, NETWORK MODULE)
7. About the error codes (U3001, U3013, NETWORK MODULE)
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
60