Marantz NA6006 Скачать руководство пользователя страница 56

Страница: 56 / 69

1-2. IR Control Test

This function is used to check IR control operations.

1-2.1. Starting up

Insert the AC plug while pressing button "

POWER

", and wait for more than 3 seconds.

Release button "

POWER

" when the power indicator turns green.

Select the "

IR Control Test

" using the "

CURSOR

" button, then press the "

ENTER

" button to con-

firm.

1-2.2. Operations

Displayed until AC is turned off.

1. The "I

R Control Test

" screen is displayed (5 second).

2. The names of the codes to be sent are displayed in the following order.

•AMP POWER:

16-12 (RC-5 code)

•MUTE:

16-13 (RC-5 code)

•VOLUME UP:

16-16 (RC-5 code)

•VOLUME DOWN:

16-17 (RC-5 code)

•STOP:

20-54 (RC-5 code)

•PLAY/PAUSE:

20-53-10 (RC-5 code)

•OPEN/CLOSE:

20-45 (RC-5 code)

•CD POWER:

20-12 (RC-5 code)

3. Use the "

CURSOR

" buttons to select codes, then press the "

ENTER

" button to send them.

（2 pulses）

1-3. Protection History Display Mode

If protections have been activated multiple times, the latest protection operation is recorded.

1-3.1. Starting up

Insert the AC plug while pressing button "

POWER

", and wait for more than 3 seconds.

Release button "

POWER

" when the power indicator turns green.

Select the "

Protection History

" using the "

CURSOR

" button, then press the "

ENTER

" button to

confirm.

1-3.2. Displays

Startup display

Protection History

" is displayed for 5 seconds.

To exit this mode, unplug the power cord.

・ Display when there is no history of protection being activated

・ Display when protection has been activated

Cause : Power supply short circuit detected in the power supply board

Cause : Overcurrent detected due to short in audio PCB.

Resetting the protection history

With the protection history displayed, press and hold the "

Cursor

" button for over 5 seconds to clear

the protection history.

After the history is cleared, "

No Protection

" is displayed.

Protection history is cleared, even when the set is reset (Factory Reset).

1-4. All Device DPMS Update

Standard updates are now performed through OTA.

Since this mode is only for production/development, the detailed information is not provided.

Before Servicing

This Unit

Electrical

Mechanical

Repair Information

Updating

Содержание NA6006





































































Результаты поиска

Содержание NA6006

Отзывы:

Похожие инструкции для NA6006

Бренды по названию

Популярные бренды

Marantz NA6006, Руководство по обслуживанию

Результаты поиска

Содержание NA6006

Отзывы:

Похожие инструкции для NA6006

Бренды по названию

Популярные бренды