5
Disconnect SUB PWB ASSY ITEM 1002 to release the flex-
cable (unlock connector 1003 with the help of a pincet).
On-off switch ITEM 33 take out of the bottom
Docking insert assy ITEM 22 take out of the bottom
Remove 2 screw ITEM 202 (Torx screw M2X8) on the
position as shown in the picture
Release bottompart (item 02) from toppart (item 01) and
goes from the rightside to the leftside.
Very important is to start up with one of the "sides" as
shown in the picture (Photo 13-15).
- Put a sharp knife between toppart and bottompart and
use this as a lever to separate the two parts.
- Important: push up the bottompart compared with
the toppart to unlock the plastic snaps in the holes
(bottompart).
9
10
11
12