12
4. MECHANICAL INSTRUCTIONS & SET RE-ASSEMBLY
ITEM 17 LCD bezel + ITEM 16 LCD module
Release the LCD bezel ITEM 17 from PB 1001, push
downwards to unlock the 4 plastic snaps in the snap holes
Release the flex cable from LCD ITEM 16 to unlock the
connector 1401 by till up the lid from connector 1401 (90
degrees), and take the LCD module out the LCD bezel ITEM
17
For LCD re-assembling use the opposite sequence order
and finally lock connector 1401 by pushing the lid from
connector 1401 down again
LCD module ITEM 16
LCD bezel ITEM 17
32
33
34
35