Marani CLP-2600, Руководство пользователя

Страница: 4 / 38

• Encoders and ENTER
,
ESC buttons
The CLP2600 is equipped with 3 Relative Encoders
,
NAV
/
PM1
,
PM2 and PM3
,
These encoders
allow you to navigate the user interface and edit sections of the processor
.
They allow the user to
navigate within the screen for the selection of sub
-
menus
,
pages and parameters and to select the
values to be assigned during the editing operations
.
The ENTER and ESC buttons allow the user to confirm or NOT confirm the operations
performed by the encoders
.
• UTILITY
,
EQ Edit
/
Mute
[
2
]
and Lim
/
Comp Edit
/
Bypass
[
8
]
buttons
The UTILITY button allows the User to enter the Sub
-
menus and set the general characteristics of
the Processor. TheEQ Edit
/
Mute buttons allow the User to enter the Editing Menus of the
CLP2600
'
s Input Channels Eq Section and Outputs Mute
,
and buttons Lim
/
Comp Edit
/
Bypass allow
the User to enter the Editing Menus of the CLP2600
'
s RMS Compressors
,
Output Limiter and
Compressors Bypass
.
The EQ Edit
/
Mute buttons as well as the Lim
/
Comp Edit
/
Bypass buttons have double functions
dependent on the push and hold time
.
When the EQ Edit
/
Mute buttons are pushed and held for more than two seconds
,
Input Channels
LIN or RIN are either muted or unmuted. The red LED will illuminate when the Channel is muted.
When the
MUTE LED is OFF
,
then the related Input Channel is UN
-
MUTED
.
A momentary push of the EQ Edit
/
Mute buttons enters the Editing Mode for the CLP2600
'
s Input
Channels Eq Section
(
see later for the Input Channel Editing details
).
The blue EDIT LED will now be ON
.
When the Lim
/
Comp Edit
/
Bypass buttons are pushed and held for more than two second s the
related Compressor
'
s Output is either muted or unmuted. The red LED will illuminate when the
selected Compressor
'
s Outputis MUTED
.
When the MUTE LED is OFF
,
then the related
Compressor
'
s Output Channel is UN
-
MUTED
.
A momentary push of the Lim
/
Comp Edit
/
Bypass buttons enters the Editing Menu for the related
Compressor
(
see later for the Output Channel Editing details
).
The blue EDIT LED will now be
ON
.
• CLP2600 Menu and Sub
-
Menu Structures
As stated above
,
the start
-
up default screen is the currently running preset or
,
if the device is
new
,
the flat Preset 01 preset:
From this point
,
sub
-
menus are accessed using the UTILITY
,
EQ Edit
/
Mute
,
Lim
/
Comp
Edit
/
Bypass
,
ENTER and ESC buttons and all parameters and values are navigated by the
NAV
/
PM1
,
PM2 and PM3 encoders
.
Please refer to the following menu structures
:
Multi
-
Band Compressor
Preset 01
2