Marani CLP-2600, Руководство пользователя

Страница: 28 / 38

Delay page – from this page it is possible to set the Output Channels Delay Time from
000
.
0000mS up to 848
.
9984mS, by steps of 1mS or 20
.
8uS.
To set the Delay time press ENTER an arrow will appear on the left of the screen
-> .
then use
the PM2 encoder to set the Delay Time in steps of 1mS and the PM3
,
for setting the fine
Delay Time in steps of 20
.
8 microseconds
.
The following is an example screen for the Delay page where the Delay Time of Output Channel
1 is set to 160
.
1872mS
:
Polarity page from this page it is possible to set the Output Channels Polarity
,
by using the
PM3 encoder
.
The polarity can be Normal or Inverted
(
which means rotated of 180 Degrees
).
The following is an example of a Polarity screen where the Polarity of Output Channel 1 is set to
Normal
Peak Limiter sub
-
menu – from this page it is possible to set the Output Channels Peak Limiter
.
The following is an example screen for the Peak Limiter page where the Attack Time of the Peak
Limiter is set at 5ms
,
the Release Time is set at 0
.
2Sec and the Peak Limiter Active Threshold is
set at
+
15dB
:
Once pushing ENTER the Peak Limiter
'
s parameters can be modified using the NAV
/
PM1
,
PM2
and PM3 encoders for editing the Peak Limiter
'
s Attack Time [A
].,
Release Time
[
R
]
and Active
Threshold
.
Once pushing ENTER the above screen will change as follows
:
The Attack Time [A
]
can be edited using the NAV
/
PM1 encoder
,
the Release Time [R
]
the PM2
encoder and the Peak Limiter Active Threshold the PM3 encoder
.
OutputA Left Limiter
A
:
5ms R
:
0
.
2s +15
.
0dB
OutputA Left Limiter
->
A
:
5ms R
:
0
.
2s +15
.
0dB
OutputA Left Polarity
->
Polarity = Normal
OutputA Left Delay
->
Delay = 160
.
1872mS
26