50
51
MARA OPERATOR’S MANUAL
MARA OPERATOR’S MANUAL
Table A2
Guidance and Manufacturer’s Declaration (Electromagnetic Immunity)
The GEA-SYS-16-0500 is intended for use in the electromagnetic environment specified
below. The customer or the user of the GEA-SYS-16-0500 should assure that it is used in
such an environment.
Immunity
Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic
Environment – Guidance
Electrostatic
Discharge (ESD)
IEC 61000-4-2
Electrical Fast
Transient/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage Dips,
Short
Interruptions
and Voltage
Variations on
Power Supply
Input Lines
IEC 61000-4-11
(60 Hz) Magnetic
Field
IEC 61000-4-8
±8 kV contact
±2, ±4, ±8, ±15 kV
air
±2 kV for power
supply lines
±1 kV for
input/output lines
±1 kV differential
mode
±2 kV common
mode
<5% 110 or 230 VAC
(>95% dip in 110 or
230 VAC) for 0.5
cycle
<5% 110 or 230 VAC
(>95% dip in 110 or
120 VAC) for 1 cycle
70% 110 or 230 VAC
(30% dip in 110 or
230 VAC) for 0.5 sec
<5% 110 or 230 VAC
(>95% dip in 110 or
230 VAC) for 5 sec
30 A/m
±8 kV contact
±2, ±4, ±8, ±15 kV
air
±2 kV for power
supply lines
Not Applicable
±1 kV differential
mode
±2 kV common
mode
<5% 110 or 230 VAC
(>95% dip in 110 or
230 VAC) for 0.5
cycle
<5% 110 or 230 VAC
(>95% dip in 110 or
230 VAC) for 1 cycle
70% 110 or 230 VAC
(30% dip in 110 or
230 VAC) for 0.5 sec
<5% 110 or 230 VAC
(>95% dip in 110 or
230 VAC) for 5 sec
30 A/m
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Mains power quality
should be that of a typical
commercial or hospital
environment.
Mains power quality
should be that of a typical
commercial or hospital
environment.
Mains power quality
should be that of a typical
commercial or hospital
environment. If the user
of the GEA-SYS-16-0500
requires continued
operation during power
mains interruptions,
it is recommended that
the GEA-SYS-16-0500 be
powered from an
uninterruptible power
supply or a battery.
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Guidance and Manufacturer’s Declaration (Electromagnetic Immunity)
The GEA-SYS-16-0500 is intended for use in the electromagnetic environment specified
below. The customer or the user of the GEA-SYS-16-0500 should assure that it is used in
such an environment.
Proximity Fields
from RF Wireless
Communications
IEC 61000-4-3
385 MHz at 27 V/m,
Pulse 18 Hz
450 MHz at 28 V/m,
FM ± 5kHz,
Deviation 1 kHz sine
710 MHz at 9 V/m,
Pulse 217 Hz
745 MHz at 9 V/m,
Pulse 217 Hz
780 MHz at 9 V/m,
Pulse 217 Hz
810 MHz at 28
V/mPulse 18Hz
870 MHz at 28 V/m,
Pulse 18 Hz
930 MHz at 28 V/m,
Pulse 18 Hz
1720 MHz at 28 V/m,
Pulse 217Hz
1845 MHz at 28 V/m,
Pulse 217 Hz
1970 MHz at 28 V/m,
Pulse 217 Hz
2450 MHz at 28 V/m,
Pulse 217 Hz
5240 MHz at 9 V/m,
Pulse 217 Hz
5500 MHz at 9 V/m,
Pulse 217 Hz
5785 MHz at 9 V/m,
Pulse 217 Hz
385 MHz at 27 V/m,
Pulse 18 Hz
450 MHz at 28 V/m,
FM ± 5kHz,
Deviation 1 kHz sine
710 MHz at 9 V/m,
Pulse 217 Hz
745 MHz at 9 V/m,
Pulse 217 Hz
780 MHz at 9 V/m,
Pulse 217 Hz
810 MHz at 28
V/mPulse 18Hz
870 MHz at 28 V/m,
Pulse 18 Hz
930 MHz at 28 V/m,
Pulse 18 Hz
1720 MHz at 28 V/m,
Pulse 217Hz
1845 MHz at 28 V/m,
Pulse 217 Hz
1970 MHz at 28 V/m,
Pulse 217 Hz
2450 MHz at 28 V/m,
Pulse 217 Hz
5240 MHz at 9 V/m,
Pulse 217 Hz
5500 MHz at 9 V/m,
Pulse 217 Hz
5785 MHz at 9 V/m,
Pulse 217 Hz
Portable and mobile RF
communications
equipment (including
peripherals such as
antenna cables and
external antennas) should
be used no closer than 30
cm (12 inches) to any part
of the GEA-SYS-16-0500
than 30 cm (12 inches),
including cables.
Immunity
Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic
Environment – Guidance
