manualshive.com logo in svg

Maquet Medap, Руководство по эксплуатации, Страница: 25 / 36

Поделиться
Скачать
Maquet Medap Скачать руководство пользователя страница 25

Cleaning and disinfection

Cleaning procedure

GA 5750.4172 EN 14

25

6

CAUTION!

Improper cleaning can cause property damage!
Do not spray cleaning agent directly into the joints or gaps and never use a high-

pressure cleaning unit!

6.3.2 

Cleaning procedure

 

Use the correct dose of multi-purpose detergent with water for the degree of surface 

contamination and in accordance with the instructions of the detergent manufacturer.

 

Thoroughly wipe off the product with a soft cloth slightly wetted in a multi-purpose detergent 

solution.

 

Ensure that the product is free of contamination and encapsulated particles of grime.

 

Thoroughly wipe off the product with a soft cloth dipped in clean water.

 

Ensure that the product is free of detergent residues.

 

Dry product with a dry, absorbent and lint free cloth.

 

This will help to reduce pathogen growth on the product's surface.

 

Wipe or spray disinfect the product after every cleaning.

6.3.3 

Cleaning of suction sleeve and nozzle

Suction sleeve and nozzle may clog or contaminate. The scope of delivery includes a cleaning 

needle for cleaning.

1

2

Fig. 14:  Cleaning the suction sleeve

 

Stick the cleaning needle (2) through the 

bore hole (1) of the suction sleeve.

Содержание Medap





































Отзывы:

Нет отзывов