8
HMC7000 Series Installation Guide
1010-1042 Rev 00
www.maplesystems.com
Installing the I/O Expansion Modules
Mounting the expansion modules onto a HMC7000:
The expansion modules have
two (2) locking connectors as shown in the diagram below:
Pull out the lock connectors to attach the I/O Expansion module to slots on the HMC7000:
NOTE:
you must remove the protective tab directly below the ‘Expansion Port #’ label so that the I/O Expansion
interconnect plug can attach to the HMC7000 socket.
Push down the lock connectors to safely secure the I/O Expansion module:
To remove the expansion module, simply pull out the lock connectors (on both sides) and gently pull the
module apart from the HMC.