19
HMC7000 Series Installation Guide
1010-1042 Rev 00
www.maplesystems.com
In the Select Protocol section, choose from the Protocol list box the appropriate protocol driver for your PLC. Click on
the Model list box to select the particular PLC model that most closely matches your PLC.
3.
In the Communication Settings section, enter the communications parameters that the HMC7000 will use to
attempt communications with your external PLC. For more specific information about each external PLC
supported, please visit our Support Center-Controller Info Sheets at our website:
www.maplesystems.com
.
4.
Click OK. Please note that you can check or adjust your settings by clicking on the Network Configuration folder
in the Project Information Window:
5.
Simply right-click on the PLC driver to display the Edit Model Settings dialog box:
6.
Note that you do not have to assign the external PLCs at the time that a new project is created. You can always
add the drivers later using the Project Information Window by right-clicking the appropriate Com port: