Montage- und Betriebsanleitung
Installation and Operating Instructions
41
EN
WARNING
Use of long, projecting and heavy tools or extensions!
Use of long, projecting and heavy tools or with extensions can cause the tool or parts of the tool combination to fly off
like a projectile and cause serious injuries.
When using long, projecting and heavy tools or with extensions, reduce the spindle speed according to the individual
specifications and at the responsibility of the operator.
Observe also the individually specified maximum length and balancing value of the whole system when
using exten-
sions.
With special designs, deviating drawing specifications may have to be taken into consideration.
Observe the maximum load limit for the machine-side connection.
CAUTION
Sharp cutting edges on the tool!
Sharp cutting edges may cause cutting injuries.
Wear protective gloves when changing tools.
NOTICE
Tool length adjustment with the tool clamped!
Performing an axial or radial tool length adjustment while the tool is completely clamped will result in damage to the
HTC clamping chuck.
Do not change the tool length adjustment as long as the tool is clamped.
