9
MAP Pilot Power Harness
– P/N MP-ECMA01P
The
MAP Power Harness
serves two functions:
•
It provides 12-VDC input power to the MAP Pilot, through the
Power In
connector.
•
It provides power to the steering pump of your vessel, through the
Power Out
connector.
Fig. 5: MAP Power Harness
As shown in Fig. 5, the power
cable consists of 2 connector
heads, detailed in Table 4.
For further information on
the wire pinouts of the
harness, refer to Table 5.
Table 4: MAP power harness connector heads
Connector Label
Connector P/N
Contact P/N
MA1
M12
4-pin female
P1
Deutsch DTP04-2P Deutsch 0460-204-12141
P2
Deutsch DTP06-2S
Deutsch 0462-203-12141
Table 5: Wiring pinouts for the MAP power harness
Cable Description Connector A Label
Wire colors
Connector B Label Pin B #
Power In
MA1
P1
1
2
Power Out
P2
1
2
MAP Pilot GPS Antenna
– P/N MP-ECMA01G
The
MAP GPS Antenna
is a waterproof, weatherproof antenna that connects to the in-built GPS
module of the MAP Pilot unit. A female BNC connector is attached to the other end. For optimal
performance, it must be installed with a clear view of the sky.
Fig. 6: GPS antenna schematic
Содержание MAP Pilot
Страница 35: ...34 Appendix A MAP Pilot Specifications ...