Manufacture Corporation 94-1518PF, Руководство пользователя

Страница: 253 / 280

244
The number of RADIUS Access-Request packets destined for the server that have not yet
timed out or received a response. This variable is incremented when an Access-Request is
sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge,
timeout, or retransmission.

Timeouts :
The number of authentication timeouts to the server. After a timeout, the client may retry to
the same server, send to a different server, or give up. A retry to the same server is counted
as a retransmit as well as a timeout. A send to a different server is counted as a Request as
well as a timeout.

IP Address :
IP address and UDP port for the authentication server in question.

State :
Shows the state of the server. It takes one of the following values:

Disabled :
The selected server is disabled.

Not Ready :
The server is enabled, but IP communication is not yet up and running.

Ready :
The server is enabled, IP communication is up and running, and the RADIUS module is
ready to accept access attempts.

Dead (X seconds left) :
Access attempts were made to this server, but it did not reply within the configured
timeout. The server has temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server is enabled.

Round-Trip Time :
The time interval (measured in milliseconds) between the most recent Access-Reply/Access-
Challenge and the Access-Request that matched it from the RADIUS authentication server.
The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't
been round-trip communication with the server yet.
RADIUS Accounting Statistics for Server #1
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB.
Use the server select box to switch between the backend servers to show details for.

Responses :
The number of RADIUS packets (valid or invalid) received from the server.

Malformed Responses :
The number of malformed RADIUS packets received from the server. Malformed packets
include packets with an invalid length. Bad authenticators or unknown types are not included
as malformed access responses.

Bad Authenticators :
The number of RADIUS packets containing invalid authenticators received from the server.

Unknown Types :
The number of RADIUS packets of unknown types that were received from the server on the
accounting port.