Manufacture Corporation 94-1518PF, Руководство пользователя

Страница: 185 / 280

176
13-1.2 Privilege Levels
This page provides an overview of the privilege levels. The switch provides user set Account,
Aggregation, Diagnostics, EEE, GARP, GVRP,IP, IPMC Snooping LACP LLDP LLDP MED MAC
Table MRP MVR MVRP Maintenance Mirroring POE Ports Private VLANs QoS SMTP SNMP
Security Spanning Tree System Trap Event VCL VLANs Voice VLAN Privilege Levels from 1 to
15 .
Web Interface
To configure Privilege Level in the web interface:
1.
Click Security, Management and Privilege Level.
2. Specify the Privilege parameter.
3. Click Apply.
Figure13-1.2: The Privilege Level configuration
Parameter description:

Group Name :
The name identifying the privilege group. In most cases, a privilege level group consists of a
single module (e.g. LACP, RSTP or QoS), but a few of them contains more than one. The
following description defines these privilege level groups in details:
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based
and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source guard.
IP: Everything except 'ping'.
Port: Everything except 'VeriPHY'.
Diagnostics: 'ping' and 'VeriPHY'.
Maintenance: CLI- System Reboot, System Restore Default, System Password, Configuration
Save, Configuration Load and Firmware Load. Web- Users, Privilege Levels and everything in
Maintenance.

Privilege Levels :
Every group has an authorization Privilege level for the following sub groups: configuration
read-only, configuration/execute read-write. User Privilege should be same or greater than
the authorization Privilege level to have the access to that group.
Buttons