22
Wireless setup instructions
1
– Radio specifications:
Frequency
:
433.92MHz
Transmitter range :
approx: 70 metres line-of-sight
*
*
Propagation of radio waves varies according to the medium they traverse. The range of the radio
waves will vary according to the type of construction:
If reception is poor, use the radio repeater ref. C0004760.
2
– Setup
Peering a switch:
1.
Press and hold down the setup button
for roughly 5 seconds.
The LED comes on (the card is in "radio peering" mode)
2. While the LED is on and not flashing:
press the "open" and "close" buttons
simultaneously
on the switch.
The LED flashes quickly then goes out: the switch is now peered.
Peering a remote control:
1.
Press and hold down the setup button
for roughly 5 seconds.
The LED comes on (the card is in "radio peering" mode)
2. While the LED is on and not flashing:
press the "open" and "close" buttons
simultaneously
for the desired channel on the remote control.
The LED flashes quickly then goes out: the switch is now peered.
Plasterboard/Plaster/Wood
Brick/Conglomerate
Reinforced concrete
Metal
Open
Close
Setup button
LED
Open
channel 2
Close
channel 2
Open
channel 1
Close
channel 1
