20
Push button connection Wired version
To access the push button to connect the wires of the switch, remove the two front buttons => pull
down the button:
Pressing one of the buttons and at the same time insert the wire into one of the two cavities
located below the button. Releasing the button, the wire is then clamped in the cavity. Check by
gently pulling on it. Reiterate handling for each of the three wires.
Radio switch connection
Screw or stick the radio switch to the place of your choice at least 20 m from the control casing.
White wire 0.5 mm ²
common
Black wire 0.5 mm ²
opening
Grey wire 0.5 mm ²
closing
realized a bridge
with 0.5mm² wire
mini
