21
BRINGING INTO SERVICE
The product WIBAT has a push button to learn (benchmark prog.) That determines the stroke of
each wing.
The motors work at low speed
as the apprenticeship has not been carried out.
Operation directions:
1) Turn on the system.
2) Only for radio products:
Pairing your radio transmitter by following the instructions provided in the instructions for pairing
radio
3) Start the learning cycle:
With a small screwdriver, press the prog.
4) The shutters open completely and then close. The Led blinks during all this cycle
During the closing, shutter 2 is shifted 6 secondes compared to shutter 1.
When the shutter is close and the Led is no longer flashing, the system is operational.
Operation of the shutters
Opening of the shutters
Press on the open push button
Closing of the shutters
Press on the close push button
Stopping of the shutters in
middle position
Repeat the last command.
(Open button when opening in progress)
(Button closure if closure in progress.
The WIBAT is fitted with a failsafe metric ampere measure. In the event of hindrance during
opening or closure, the shutter turns back on the direction it is working in and returns to its initial
position.
