MantelMount MM855, Руководство по установке

Страница: 12 / 16

PAGE 12 MantelMount MM8
UP DOWN
RIGHT LEFT
HOME SET
M 2 M 1
Never allow children to play around, hang from,
or operate MantelMount. Property damage or
personal injury can occur.
Removing unwanted Tilt :
The TV should be fairly vertical in the up position and
parallel to the wall. If the TV is tilted slightly downward,
back out the adjustment screw slightly as shown.
Tighten the locknut after the adjustment is made.
This unique safety feature of the MantelMount MM8 will
monitor the temperature above your fireplace at all times and
raise the mount automatically if the heat behind the TV rises
above 130
Û F (54 Û C).
The Thermocouple is located inside the
Upper Arm. Be careful not to disturb the
small wire attached to the underside of
the Arm.
Setting the Memory Positions :
Once all of the Hard Stops and Soft Stops are set,
jog the mount to the desired viewing position.
Within 2 seconds apart, press the “SET” button on
the Remote, and then immediately press the “M1”
button. The Memory Position should be set.
Repeat for second viewing position if desired, using
the “M2” button.
Auto Raising Heat Monitor (ARHM):
!
CAUTION:
20 21
22