MantelMount MM8
PAGE 11
UP
DOWN
RIGHT
LEFT
HOME
SET
M 2
M 1
UP
DOWN
RIGHT
LEFT
HOME
SET
M 2
M 1
Adjusting the Hard Bottom
Stop Position
:
Jog the mount to the maximum safe
downward position. Do not swivel the
mount sideways. The mount may stop
on its own due to the internal limit.
Loosen the Locknuts and adjust the
Bottom Stop screws to this position.
Tighten both locknuts after the
adjustments are made.
Adjusting the Soft Side Swivel
Stop Position
:
Once the hard stop is set, jog the mount inward
slightly from the Hard Stop. This will ensure the
mount does not hit the Hard Stop.
Within 2 seconds apart, press the “SET” button on
the Remote, and then immediately press either the
“LEFT” or “RIGHT” button that matches the side.
The Soft Stop should be set for that side.
Return to Step 18 for other side.
Tighten both locknuts after the adjustments are
made.
Adjusting the Soft Bottom Stop
Position
:
Once the hard stop is set, jog the mount up
slightly from the Hard Stop. This will ensure
the mount does not hit the Hard Stop.
Within 2 seconds apart, press the “SET” button
on the Remote, and then immediately press
the “DOWN” button.
The Soft Stop should be set.
Adjusting the Hard Side Swivel
Stop Positions
:
Jog the mount to the maximum safe
side position. Do not raise or lower the
mount.
Loosen the Locknut and adjust the
Swivel Stop screw to the desired
stopping position. Note: The locknut can
be moved to the other side of the Swivel
Bracket to increase the thread length.
Proceed to Step 19 to set the Soft Stop.
Repeat for other side.
Adjusting the Downward Hard and Soft Travel Stops - FIRST:
Adjusting the Side Swivel Hard and Soft Travel Stops - SECOND:
16
17
18
19
