Operator’s Manual
Self-Propelled Scissor Lift
Version 1
25
Test the Steering
Note
: When performing the steering and drive function tests, stand in the platform facing the steer
end of the machine.
30.
Type A /B controller
: press the drive function enable button. Indicator light must be on.
31. Press and hold the function enable switch on the control handle.
32. Press the thumb rocker switch on top of the control handle to the left.
➢
Result
: The steering wheels should turn to the left.
33. Press and hold the function enable switch on the control handle.
34. Press the thumb rocker switch on top of the control handle to the right.
➢
Result
: The steering wheels should turn to the right.
Test Drive and Braking
35. Press and hold the function enable switch on the control handle.
36. Slowly push the control handle forward until the machine begins to move, then return the
control handle to the center position.
➢
Result
: The machine should move forward, then stop abruptly.
37. Press and hold the function enable switch on the control handle.
38. Slowly pull the control handle backward until the machine begins to move, then return the control
handle to the center position.
➢
Result
: The machine should move backward, then stop abruptly.
CAUTION
The drive brakes must be able to hold the machine on any slope within its slope ratings.
Test Drive Speed
39.
Type A/B controller
: press the drive speed selector button. Indicator light must be on.
40. Press and hold the function enable switch on the control handle.
41. Slowly push the control handle to the full drive (forward or backward) position.
➢
Result
: The machine should move with fast speed.
42.
Type A/B controller
: press the drive speed selector button. Indicator light must be off.
43. Press and hold the function enable switch on the control handle.
44. Slowly push the control handle to the full drive (forward or backward) position.
➢
Result
: The machine should move with slow speed.
