Manitowoc NBT60XL, Руководство оператора

Страница: 78 / 184

CONTROLS AND OPERATING PROCEDURES OPERATOR MANUAL NBT60XL
3-20
Published 11-01-2020 Control # 710-00
Deploying the Cab Ladder
1. Remove the ladder pin (1).
2. Swing the ladder (3) to the vertical position over the
edge of the deck.
3. Secure the ladder on the ladder catches (4) on the side
of the decking.
Accessing the Cab
After opening the cab door, climb the ladder and at the same
time grasp the grab handles (2) in the cab doorway to enter
the cab. Do not try to access the crane cab by other means.
Stowing the Cab Ladder
1. Release the ladder (3) from the ladder catches (4) using
the release handle (5).
2. Rotate the ladder (3) up to the decking.
3. Secure the ladder (3) with the ladder pin (1).
Using the Movable Ladder to Access Decking
Use the movable ladder (1, Figure 3-14) stowed on the right
rear bumper to access different areas of the decking. In the
stowed position, use the ladder to access to the rear of the
crane and the hydraulic tank and hoist area of the
superstructure.
The movable ladder (1) can also be used to access different
locations on the decking from the right and left sides of the
crane. Figure 3-14 shows the possible locations. The ladder
must be stowed in the rear bumper position and secured to
the bumper with linch pins prior to transport.
9737
5
3
2
4
3
1
9610
9636
3
FIGURE 3-13
Illustration for reference only.
Your crane may be different.
CAUTION
Failure to stow and secure the movable ladder with linch
pins prior to transport can result in damage to the ladder.
Fo
r
Reference
Only