manualshive.com logo in svg

Manitowoc National Crane 800D, Руководство оператора и по обслуживанию

Поделиться
Скачать
Manitowoc National Crane 800D Скачать руководство пользователя страница 13

National Crane

Published 5-27-2018 Control # 039-06

1-3

800D

SAFETY INFORMATION

No personnel shall be allowed to climb onto the crane or
enter the crane cab or operator’s station unless performance
of their duties require them to do so, and then only with
knowledge of the operator or other qualified person.

Allow 

No One

 other than the operator to be on the crane

while the crane is operating or moving, unless they are
seated in a two-man cab.

Do not remove

 the 

Load Chart

, this 

Operator Manual

, or

any decal from this crane.

Inspect the crane every day (before the start of each shift).
Ensure that routine maintenance and lubrication are being
dutifully performed. Don’t operate a damaged or poorly
maintained crane. You risk lives when operating faulty
machinery - including your own.

If adjustments or repairs are necessary, the operator shall
notify the next operator.

OPERATOR QUALIFICATIONS

Qualified person

 is defined as one who by reason of

knowledge, training and experience is thoroughly familiar
with crane operations and the hazards involved. Such a
person shall meet the operator qualifications specified in
Occupational Safety and Health Administration (OSHA)
Regulations (United States Federal Law), in ASME B30.5
American National Standard, or in any other applicable
federal, state or local laws.

Ensure that all personnel working around the crane are
thoroughly familiar with safe operating practices. You must
be thoroughly familiar with the location and content of all
decals on the crane. Decals provide important instructions
and warnings and must be read prior to any operational or
maintenance function.

Refer to the 

Parts Manual

 for this crane for the locations of all

safety decals.

You must be familiar with the regulations and standards
governing cranes and its operation. Work practice
requirements may vary slightly between government
regulations, industry standards, and employer policies so a
thorough knowledge of all such relevant work rules is
necessary.

An untrained operator subjects himself and others to death
or serious injury.

You must not operate this machine unless

:

•

You have been trained in the safe operation of this
machine.

•

You read, understand, and follow the safety and
o p e r a t i n g   r e c o m m e n d a t i o n s   c o n ta i n e d   i n   t h e
manufacturer’s manuals, your employer’s work rules,
and applicable government regulations.

•

You are sure the machine has been inspected and
maintained in accordance with the manufacturer’s
manuals and is operating properly. 

•

You are sure that all safety decals, guards, and other
safety features are in place and in proper condition.

Do not attempt to operate the crane unless you are trained
and thoroughly familiar with all operational functions.
Controls and design may vary from crane to crane; therefore,
it is important that you have specific training on the particular
crane you will be operating.

Training is ESSENTIAL for proper crane operation. Never
jeopardize your own well-being or that of others by
attempting to operate a crane on which you have not been
trained. 

You must be mentally and physically fit to operate a crane.
Never attempt to operate a crane while under the influence
of medication, narcotics, or alcohol. Any type of drug could
impair physical, visual and mental reactions, and
capabilities.

Fo

r

 

Reference

 

Only

Содержание National Crane 800D

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды