background image

Installation Instructions

Section 2

2-4

Part Number 020002392

04/09

!

Warning

When using electric appliances, basic precautions
should always be followed, including the following:

a. Read all the instructions before using the 

appliance.

b. To reduce the risk of injury, close 

supervision is necessary when an 
appliance is used near children.

c. Do not contact moving parts.

d. Only use attachments recommended or 

sold by the manufacturer.

e. Do not use outdoors.

f. For a cord-connected appliance, the 

following shall be included:

• Do not unplug by pulling on cord. To 

unplug, grasp the plug, not the cord.

• Unplug from outlet when not in use and 

before servicing or cleaning.

• Do not operate any appliance with a 

damaged cord or plug, or after the 
appliance malfunctions or is dropped or 
damaged in any manner. Contact the 
nearest authorized service facility for 
examination, repair, or electrical or 
mechanical adjustment.

g. For a permanently connected appliance — 

Turn the power switch to the off position 
when the appliance is not in use and before 
servicing or cleaning.

h. For an appliance with a replaceable lamp — 

Always unplug before replacing the lamp. 
Replace the bulb with the same type.

i. For a grounded appliance — Connect to a 

properly grounded outlet only. See 
Grounding Instructions.

Содержание M-45























Отзывы: