Manitowoc M-45 страница 17 Скачать руководство пользователя

Страница: 17 / 22

Section 4

Maintenance

Part Number 020002392

04/09

4-3

Disassembly

DISASSEMBLY FOR CLEANING AND
MAINTENANCE

NOTE: Sanitize the ice dispenser at Initial Start-up in
addition to monthly sanitizing. You will need a slotted
screwdriver in order to disassemble.

1. These parts will be removed; agitator pin, agitator

and paddle wheel.

a. Rotate the agitator arm so the paddle wheel pin

handle is pointing up, toward the ceiling.

b. Prepare agitator pin for removal by removing the

pin from the agitator bar and paddle wheel.

c. Then remove the paddle wheel pin from the hole in

the agitator.

d. Push the agitator bar toward the back of the unit

until the agitator is free of the paddle wheel hub.

DISASSEMBLE THE ROCKING CHUTE

1. Loosen the two knurled fasteners that hold the

merchandiser in place.

2. Remove the merchandiser.

3. Remove outer bracket.

4. Remove door lock.

5. Remove door and ice chute.

6. To remove the the finger guard reach inside the bin

chute, push the paddle wheel guard to one side.

7. Gently twist the guard allowing it to flex out of the

guard hinge holes on the chute and pull it towards
you removing it from the bin chute.

Warning

Unplug unit before servicing or cleaning. Ice dispenser
bin contains moving parts that can move at any time
and will cause injury if hands are in the way

Paddle Wheel

Agitator

Merchandiser

Ice Chute

Paddle

Wheel
Guard

Guard

Hinge

Hole

Bin

Chute

Paddle

Wheel

Guard

Содержание M-45























Результаты поиска

Содержание M-45

Отзывы:

Похожие инструкции для M-45

Бренды по названию

Популярные бренды

Manitowoc M-45, Инструкция по установке, использованию и уходу

Результаты поиска

Содержание M-45

Отзывы:

Похожие инструкции для M-45

Бренды по названию

Популярные бренды