Manitowoc K00440, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 28

Part Number 000008463 Rev 02 3/16 15
Section 2 Installation
6. Route LuminIce® hoses to evaporator and attach.
• Insert hose closest to the control box in the bottom
evaporator bulkhead hole.
• Insert the other hose in the upper evaporator
bulkhead hole.
7. Install the evaporator dust cover and test run the ice
machine and LuminIce®. The Luminice® is energized
whenever power is applied to the ice machine.
LuminIce® Installation Two-Evaporator Ice
Machines
n
Warning
Disconnect power to ice machine at the electrical
disconnect. Pressing the power button does not
disconnect line voltage.
1. Disconnect all power to the ice machine at the
electrical disconnect.
2. To allow access for LuminIce® tubing, the plastic
caps in the evaporator compartment bulkhead wall
must be removed and discarded. Cap located behind
evaporator will fall into the water trough. Remove
water trough to retrieve cap, then discard.
Remove Plastic Caps From
Evaporator Bulkhead
3. Cut hose to length.
• Cut one hose 8" (20 cm) long.
• Cut one hose 18" (46 cm) long.
4. Assemble LuminIce®.
• Assemble LuminIce® to bracket.
• Install tubing and secure with hose clamps.
• Insert a tubing adapter into each hose.