Manitou MT-X 625 2-E3 Series Скачать руководство пользователя страница 56

Страница: 56 / 132

2-24

"BUCKET" MODE

USE WITH BUCKET

CONFIGURATION 1

- Place the lift truck in the transport position.

- Press the

button, "BUCKET" MODE is confirmed by an audible beep and the lighting of the indicator lamp.

- Press this button again to return to "HANDLING” MODE.

- Protection against forward tip-over when making aggravating movements is ensured, except when the telescopic boom is retracted.

NOTE: “BUCKET” MODE remains enabled as long as the mode is not changed by the operator, even after switching off the ignition.

DEVICE STATUS

HALTED

TELESCOPE(S) IN RETRACTED POSITION

A6: An audible signal on passing into the red

zone.

-No sound alarm.

NOTE : For AUSTRALIA keep the configuration 1.

CONFIGURATION 2

- Place the lift truck in the transport position.

- Press the

button, "BUCKET" MODE is confirmed by an audible beep and the lighting of the indicator lamp.

- Press this button again to return to "HANDLING” MODE.

- Protection against forward tip-over when making aggravating movements is ensured, except when the telescopic boom is retracted.

NOTE: “BUCKET” MODE remains enabled as long as the mode is not changed by the operator, even after switching off the ignition.

DEVICE STATUS

HALTED

TELESCOPE(S) IN RETRACTED POSITION

A6: An audible signal on passing into the red

zone.

-No sound alarm.

-Warning light A9 lit.

CONFIGURATION 3

- Place the lift truck in the transport position.

- Press the

button, "BUCKET" MODE is confirmed by an audible beep and the lighting of the indicator lamp.

- Press this button again or switch off the ignition with the ignition key to return to "HANDLING” MODE.

- Protection against forward tip-over when making aggravating movements is ensured, except when the telescopic boom is retracted.

DEVICE STATUS

HALTED

TELESCOPE(S) IN RETRACTED POSITION

-"BUCKET" mode is disabled if the lift truck

remains stationary.

-No sound alarm.

-Warning light A9 lit.

647421

(22/08/2017)

MT-X

625

Série

2-E3

COMFORT

Содержание MT-X 625 2-E3 Series





































































































































Результаты поиска

Содержание MT-X 625 2-E3 Series

Отзывы:

Похожие инструкции для MT-X 625 2-E3 Series

Бренды по названию

Популярные бренды

Manitou MT-X 625 2-E3 Series, Руководство оператора

Результаты поиска

Содержание MT-X 625 2-E3 Series

Отзывы:

Похожие инструкции для MT-X 625 2-E3 Series

Бренды по названию

Популярные бренды