Manitou MSI 40, Руководство оператора

Страница: 63 / 116

2 - 35
5 - L
IGHT SWITCH
,
HORN AND INDICATOR SWITCH
The switch controls the road lights and horn.
A - All lights are off, the rear direction indicators do not flash.
B - The right rear hand direction indicator flash.
C - The left rear hand direction indicator flash.
D - The sidelights (OPTION) and the rear lights are on.
E - The dipped headlights (OPTION) and the rear lights are on.
F - The main beam headlights (OPTION) and the rear lights are on.
G - Headlight signal (OPTION).
To operate the horn, press the switch.
NOTE : The positions D - E - F - G can be carried out without the ignition
being on.
6 - I
GNITION SWITCH
The key switch has five positions :
P - Ignition off, parking position.
O - Ignition switched off and engine stopped.
I - Ignition on.
II - Heating.
III - The engine starts, return to position I as soon as the key is released
7 - K
E Y
-
O P E R AT E D B AT T E R Y D I S C O N N E C T I N G
DEVICE
Enables the battery to be rapidly cut off from the electric circuit in the event of
a short circuit or a fire.
8 - F
USES BOX
Remove the cover to replace a fuse, which is to be used as per the following
numbers :
1 - OPTION Working tail lights (10A).
OPTION Left working tail light (10A).
2 - OPTION Working head lights (10A).
OPTION Left working head light (10A).
3 - OPTION Flashing alarm light (7,5A).
4 - Cabin lifting (10A).
5 - OPTION (10A).
6 - Rear windscreen wiper (7,5A).
NOTE : Replace a worn fuse by a new fuse of equal quality and capacity. Do
not re-use a repaired fuse.
9 - A
CCELERATOR PEDAL
F
D
G
C
B
A
E
1
3
5
6
4
2