Manitou MSI 40 T S3 ST3B, Руководство оператора

Страница: 92 / 114

3-26
E2 – FUEL TANK
CLEAN
E3 – FUEL TANK BREATHER
CHANGE
Place the lift truck on level ground with the I.C. engine stopped.
IMPORTANT
While carrying out these operations, do not smoke or work near a flame.
Never try to carry out welding or any other operation by yourself, as this could cause an explosion or a fire.
- Open the side bonnet.
- Inspect the parts susceptible to leaks in the fuel circuit and in the tank both visually
and by touch.
- In the event of a leak, contact your dealer.
- Place a container under drain plug 1 and unscrew the plug.
- Remove filling plug 2 to ensure that the oil is drained properly.
- Rinse out with ten litres of clean diesel through filler port 3.
- Refit and tighten the drain plug 1 (tightening torque 72 to 88 N.m).
- Unscrew the breather 4 and replace it with a new one (see: 3 - MAINTENANCE:
FILTERS CARTRIDGES AND BELTS) (tightening torque 5 ±2 N.m).
- Fill the fuel tank with clean diesel filtered through the filler port.
- Refit the filler plug 2.
- If necessary, bleed the fuel supply system (see: 3 - MAINTENANCE: G1 - FUEL SUPPLY
SYSTEM).
E - EVERY 1000 HOURS OF SERVIVE OR TWO YEARS
Carry out the operations described previously as well as the following operations.
E1 – ENGINE CRANKCASE VENTILATION FILTER
CHANGE
- Lift up the cab (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- Carefully clean the outside of the filter and its holder, to prevent dust from getting
into the system.
- Disconnect hose 1.
- Undo the nuts 2 and remove the cover 3.
- Remove the circlips 4.
- Extract the filter 5 and discard it together with the seal of the cover 2.
- Refit a new seal on the cover and insert a new filter (see: 3 - MAINTENANCE: FILTER
CARTRIDGES AND BELTS).
- Insert a new filter and seal (see: 3 - MAINTENANCE: FILTER CARTRIDGES AND BELTS).
NOTE: Ensure that the flats of the filter 5 and shaft 6 are aligned.
- Put back the circlips 4.
- Refit the cover 3 and tighten the nuts 2 (tightening torque 25 N.m).
- Reconnect hose 1.
1
2
3
6
4
5
1
2
4
3
647177 (23/02/2017) MSI 40/50 T S3 ST3B