Manitou MSI 40 T S3 ST3B, Руководство оператора

Страница: 78 / 114

3-12
B - EVERY 50 HOURS SERVICE
Carry out the operations described previously as well as the following operations.
B1 – DRY AIR FILTER CARTRIDGE
CHECK - CLEAN
In case of use in a heavily dust laden atmosphere, there are pre-filtration cartridges (see: 3 - MAINTENANCE: FILTERS CARTRIDGES
AND BELTS). Also, the checking and cleaning periodicity of the cartridge must be reduced.
IMPORTANT
If the clogging indicator light comes on, this operation must be carried out as quickly as possible (1 hour maximum).
The cartridge must not be cleaned more than seven times, after which it must be changed.
Never use the lift truck without an air filter or with a damaged air filter.
- For the disassembly and reassembly of the cartridge, see: 3 - MAINTENANCE: D3 - DRY AIR FILTER CARTRIDGE.
- Clean the filter cartridge using a compressed air jet (max. pressure 3 bar) directed from the top to the bottom and from
the inside towards the outside at a minimum distance of 30 mm from the cartridge wall.
- Cleaning is completed when there is no more dust on the cartridge.
IMPORTANT
Respect the safety distance of 30 mm between the air jet and the cartridge to avoid tearing or making a hole in the cartridge.
The cartridge must not be blown anywhere near the air filter box.
Never clean the cartridge by tapping it against a hard surface.
Your eyes must be protected during this intervention.
- Clean the cartridge seal surfaces with a damp, clean lint-free cloth and grease with a silicone lubricant (MANITOU
reference: 479292).
- Check visually the outer condition of the air filter and its mounts. Verify the condition of the hoses and their mounts also.
IMPORTANT
Never clean the dry air filter cartridge by washing it in liquid.
Do not clean by any means the safety cartridge located inside the filter cartridge, change it for a new one if it is clogged or damaged.
B2 – RADIATOR CORE
CLEAN
IMPORTANT
In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could damage the radiator fins.
- Open the counterweight cowling 1 and place the safety prop 2.
- Lift up the cab (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- Using a soft cloth, clean the radiator in order to remove as much dirt as possible.
- Clean the radiator with a blast of compressed air aimed from the outside towards
the inside. This is the only effective way of removing impurities (opposite direction
to the cooling air flow).
1
2
647177 (23/02/2017) MSI 40/50 T S3 ST3B