Manitou 120 AETJ COMPACT, Руководство оператора

Страница: 56 / 70

D1/1
D1/2
D1/3
3 - 10
D1 - G
REASE THE TURRET ROTATION CROWN
- The greasing of the bearing tracks and lubrication of the teeth shoul be
carried out every 100 hours of operation, and also before and after a long
period of non use.
- Grease to be required: (see chapter: LUBRICANTS)
- Lift the inferior and superior arm in order to facilitate the access.
- Open the turret cowling.
- Reach to the 4 grease points (Fig. D1/1) and grease with abundance the
crown by orienting the turret (access to the represented grease points Fig.
D1/2).
- With a brush, apply the lubricant on the crown wheels 2 and pinion 3 (Fig.
D1/3).
- Lubricant to be required: (see chapter : LUBRICANTS)
D2 - C
HECK THE TIGHTNESS OF THE SCREWS OF
THE TURRET ORIENTATION CROWN
- The check of the tightness of the screws shoul be made no later after 50
hours of operation. Then, it would be necessary to repeat this check every
100 hours of operation.
- The theorical tightening torque of the screws is 12 daNm ± 10%.
- 1 daN = 1 Kg.
D - EVERY 100 HOURS OF OPERATION
1
1
1
1
2
3