Manitou 120 AETJ COMPACT, Руководство оператора

Страница: 42 / 70

2 - 24
L
OADING AND UNLOADING OF THE ACCESS PLATFORM
Check that the safety instructions associated with the flatbed are being obser-
ved before loading the access platform, and make sure that the truck driver is
informed about the dimensional characteristics and the weight of the access
platform. (see chapter: CHARACTERISTICS).
During the loading on a flatbed, the access platform should be in transportation
position: - Superior arm in horizontal position
- Inferior and intermediate arm in lower position
- Telescope gone back
and arrest the turret
- It is possible to lift the extension arm
Make sure that the dimensions and load capacity of the flatbed are adequate
for transprorting the access platform. Also check the permissible ground
contact pressure of the flatbed in relation to the access platform.
LOADING THE ACCESS PLATFORM
- Chock the wheels of the flatbed item 1 (Fig A).
- Secure the loading ramps to the flatbed so as to make the smallest possible
angle for loading the access platform.
NOTE : The machine is represented with a reduce space required
(platform is completely foldep up) (Fig A).
ANCHORING THE ACCESS PLATFORM
- Place wheel chocks on the flatbed in front and behind each tyre of the access
platform.Item 2 (Fig A).
- Also place chocks on the inside and outside of each tyre. Item 3 (Fig A).
- Anchor the access platform to the flatbed using ropes of suitable strength. Tie
the ropes at the front and the rear, passing them through the lifting eyes on
the access platform Item 4 (Fig A) Item 5 (Fig B).
A
B
1
3
5
3
2 4