Manitou Systems AS960, Руководство оператора

Страница: 7 / 28

2.3 Maintenance Hazards
Before servicing, park machine on a firm and level
surface, set parking brake, chock wheels, and place
a “Do Not Operate” tag on control panel. Read and
understand this manual. If you do not understand any
part of the manual, contact Manitou Group Attachments
at 866-232-8224.
Always wear face and/or eye protection, safety shoes,
and other protective equipment appropriate for the job.
Always use Manitou Group Attachments replacement
parts.
^
WARNING
Crushing hazard.
Before performing inspections, service or
maintenance, lockout operating unit by:
• Park machine on firm, level surface.
• Engage parking brake.
• Turn engine off and remove key.
•
Place “Do Not Operate” tag on control
panel.
^
WARNING
Moving parts can crush and cut.
Keep clear of moving components.
Follow lockout procedure before
performing maintenance.
^
WARNING
Burn hazard.
Hot and high pressure hydraulic oil.
Allow oil to cool before servicing.
^
WARNING
Drilling, sawing, sanding or machining
wood products can expose you to wood
dust, a substance known to the State of
California to cause cancer.
Avoid inhaling wood dust or use a dust
mask or other safeguards for personal
protection.
For more information go to www.
P65Warnings.ca.gov/wood.
^
WARNING
Wear an approved dust mask or respirator.
Follow local, state and federal regulations.
5
Attachments.Manitou-Group.com