Manitou Systems AS960, Руководство оператора

Страница: 17 / 28

1.
Attach brush mulcher to skidsteer. See Attach
Brush Mulcher in this section.
^
WARNING
Prevent serious injury or death.
Operating unit must be equipped with a
forestry guard to protect the operator.
2.
Lower mulcher so skid plates are on ground.
3.
Set engine speed to low idle and engage mulcher.
4.
Slowly increase engine speed to high idle. Verify
mulcher is operating smoothly and start travel.
5.
If mulcher stalls, stop movement, slightly raise
mulcher and allow rotor to regain speed. Slow
ground speed to prevent further stalling.
^
WARNING
Moving parts can crush and cut.
Keep clear of moving components.
Lockout operating unit before clearing
jams.
^
WARNING
Never approach brush mulcher before
cutting wheel has come to a complete
stop.
6.
Monitor pressure gauge closely during startup and
throughout the cutting process.
When first starting the rotor, hydraulic pressure on
gauge will jump from zero to maximum as the motor
works to speed up the rotor. It can take up to thirty
seconds for the rotor to reach operational speed. Do
not attempt to use the mulcher before operational
speed is reached. The spinning momentum of the rotor
provides the cutting power.
As operational speed is reached, pressure will drop
to 2000 - 3000 psi. Monitor pressure gauge during
operation. Maximum cutting performance is with
hydraulic pressure between 2000 - 3000 psi.
15
Attachments.Manitou-Group.com