12
SWITCHING ON (continued)
Turn on your TV set and choose the correct SCART input for the
receiver (you usually do this by pressing an ‘AV’ button on your TV
remote – see your television’s manual for guidance).
Switch on the mains socket the Plaza DS•100A is connected to.
After a few seconds, the receiver’s first freesat installation screen
shown below will appear on the television screen:
TUNING IN
When the first installation screen is displayed, use the or
buttons to select the screen format of your television (16:9
Widescreen or the squarer 4:3 Traditional). Then press the
button to highlight the SCART output selection box, and use the
or buttons to select the correct output for your television.
Press the button to display the next installation screen.
HINT:
If you do not see this screen on your television, see
‘Troubleshooting’ at the back of this user guide.
